Matte finish care
If your vehicle has a clear matte finish, observe the following instructions in order to avoid damage to the paintwork due to incorrect care.
These notes also apply to light alloy wheels with a clear matte finish.
Never polish the vehicle or the light alloy wheels. Polishing causes the finish to shine.
The following may cause the paint to become shiny and thus reduce the matte effect:
- Vigorous rubbing with unsuitable materials.
- Frequent use of car washes.
- Washing the vehicle in direct sunlight.
Never use paint cleaner, buffing or polishing products, or gloss preserver, e.g. wax. These products are only suitable for high-gloss surfaces. Their use on vehicles with matte finish leads to considerable surface damage (shiny, spotted areas).
Always have paintwork repairs performed at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center.
Do not use wash programs with a hot wax treatment under any circumstances.
The vehicle should preferably be washed by hand using a soft sponge, car shampoo and plenty of water.
Use only insect remover and car shampoo from the range of recommended and approved Mercedes-Benz care products.
See also:
Rolling with the engine switched off
WARNING
There is no power assistance for the steering
and the brake when the engine is not running.
Steering and braking requires significantly
more effort and you could lose control of the
...
Setting a speed
WARNING
Keep in mind that it may take a brief moment
until the vehicle has made the necessary
adjustments.
Increase or decrease the set vehicle speed to
a value that the prevailing road c ...
Resetting values
You can reset the values of the following functions:
• Trip odometer
• Trip computer "From start"
• Trip computer "From reset"
Press the
or
button on the
steering wheel ...