Ashtray in the rear-compartment center console
- To open: pull cover 2 out by its top edge.
- To remove the insert: press release button 3 and lift the insert up and out.
- To install the insert: install insert 1 from above into the holder and press down into the holder until it engages.
See also:
Activation conditions
You can activate the HOLD function if:
• the vehicle is stationary.
• the driver's door is closed or your seat belt is fastened.
• the electric parking brake is released.
• the hood is clo ...
Wet roads
WARNING
After driving in heavy rain for some time
without applying the brakes or through water
deep enough to wet brake components, the
first braking action may be somewhat
reduced. You have ...
Tire pressure of at least 180 kPa
(1.8 bar/26 psi) is not reached
If, after five minutes, a pressure of 180 kPa
(1.8 bar/26 psi) has not been achieved:
•► Press the on/off switch on the tire inflation
compressor to 0.
The tire inflation compressor is swi ...