SmartKey
0 To remove the SmartKey (shift the transmission to position P)
1 Power supply for some consumers, such as the windshield wipers
2 Ignition (power supply for all consumers) and drive position
3 To start the engine
If the SmartKey is in position 0 in the ignition lock for an extended period of time, it can no longer be turned in the ignition lock. The steering is then locked. To unlock, remove the SmartKey and reinsert it into the ignition lock. The steering is locked when you remove the SmartKey from the ignition lock.
The SmartKey can be turned in the ignition lock even if it is not the correct
SmartKey for the vehicle. The ignition is not switched on. The engine cannot be
started.
See also:
Activating/deactivating Bluetooth®
Select Vehicle in the main function bar by
turning the COMAND controller and
press to confirm.
Select System by turning
the
COMAND controller and press to
confirm.
Select Blueto ...
Installing/removing the combined
cargo cover and net
You can reach the combined cargo cover and
net to install and remove it from the cargo
compartment and, with the seat backrest
folded forwards, from the left-hand rear door.
•► Make sure ...
Windshield/headlamp cleaning
system
WARNING
Washer solvent/antifreeze is highly
flammable. Do not spill washer solvent/antifreeze on hot engine parts, because
it may
ignite and burn. You could be seriously
burned.
Use MB Summ ...