The first 1000 miles (1500 km)
The more you look after the engine when it is new, the more satisfied you will be with its performance in the future.
- Drive at varying vehicle speeds and engine speeds for the first 1000 miles (1500 km) for this reason.
- Avoid overstraining the vehicle during this period, e.g. driving at full throttle.
- Change gear in good time, at the latest when the tachometer needle is 2/3 of the way to the red area in the tachometer display.
- Do not manually shift to a lower gear to brake the vehicle.
- If possible, do not depress the accelerator pedal past the point of resistance (kickdown).
- Only select shift ranges 3, 2 or 1 when driving slowly, e.g. in mountainous terrain.
- If possible, drive in drive program E for the first 1000 miles (1500 km).
After 1000 miles (1500 km), you can increase the engine speed gradually and bring the vehicle up to full speed.
You should also observe these notes on running in if the engine or parts of
the drive train on your vehicle have been replaced.
Always observe the respective speed restrictions.
See also:
Calling up a stored setting
•► Press and hold the relevant storage
position button 1, 2 or 3 until the seat,
steering wheel and exterior mirrors are in
the stored position.
The setting procedure is interrupted as
...
Vehicle
Display messages
Possible causes/consequences and
Solutions
You have attempted to start the engine with the transmission in
position R or D.
Shift the transmission ...
Exterior
Derived from a coupe study that appeared at the 2003 Frankfurt Motor Show in
Germany, the four-door CLS-Class features a high belt line and short side glass.
A distinctive body crease rises from t ...