Activating/deactivating the residual heat function

It is possible to make use of the residual heat of the engine to continue heating the stationary vehicle for up to 30 minutes after the engine has been switched off. The heating time depends on the temperature that has been set.

The blower will run at a low speed regardless of the airflow setting.

will be activated. The blower runs at medium speed. If you activate the residual heat function at high temperatures, only the ventilation will be activated. The blower runs at medium speed.

an hour after the SmartKey is removed. The vehicle is then ventilated for 30 minutes It is possible that the residual heat function may be activated automatically an hour after the SmartKey is removed. The vehicle is then ventilated for 30 minutes to dry the air-conditioning system.

  • Turn the SmartKey to position 0 in the ignition lock or remove it.
  • To activate: press the The indicator lamp in the button button. The indicator lamp in the lights up. button lights up.
  • To switch off: press the button. The indicator lamp in the button. The indicator lamp in the button goes out.

Residual heat is deactivated automatically:

  • after about 30 minutes
  • when the ignition is switched on
  • if the battery voltage drops
  • if the coolant temperature is too low
    See also:

    Performance
    The nice thing about being able to afford the ML550 is the 382-horsepower V-8 under its hood. Calling this SUV "fast" is an understatement. Mercedes says it goes from zero to 60 mph in 5 ...

    Low-beam headlamps (halogen headlamps)
    Switch off the lights. Open the hood. Remove the headlamp cover (). Left-hand headlamp: detach the washer fluid reservoir (). Turn housing cover 1 counter-clockwise and pull it out. Pul ...

    Safety
    Standard features include antilock brakes, side-impact airbags for the front seats, side curtain airbags, an electronic stability system and active front head restraints. ...