Turn signal lamps/side marker lamps
- Switch off the lights.
- Open the hood.
- Remove the headlamp cover ().
- Left-hand headlamp: detach the washer fluid reservoir ().
- Turn bulb holder 1 or 2 counterclockwise and pull it out.
- WY 5 W (turn signal lamp and side marker lamp): remove the bulb from bulb holder 1.
- PY 21 W (turn signal lamp): turn the bulb counter-clockwise, applying slight pressure, and remove it from bulb holder 2.
- WY 5 W (turn signal lamp and side marker lamp): insert the new bulb into bulb holder 1.
- PY 21 W (turn signal lamp): insert the new bulb into bulb holder 2 and turn it clockwise while applying slight pressure.
- Insert bulb holder 1 or 2 and turn it clockwise.
- Left-hand headlamp: fasten the washer fluid reservoir ().
- Install the headlamp cover ().
See also:
Cleaning genuine wood and trim
elements
– Wipe the wooden trim and trim pieces with
a damp, lint-free cloth, e.g. a microfiber
cloth.
– Heavy soiling: use car care and cleaning
products recommended and approved by
Mercedes-Benz.
...
Activating/deactivating Lane Keeping
Assist
You can use the Lane Keeping Assist
function to activate/deactivate Lane Keeping
Assist or Active Lane Keeping
Assist.
Press the or
button on the
steering wheel to select the DriveAssist ...
Active Curve System
The Active Curve System uses active
stabilizers to optimize both driving comfort
and vehicle agility. Depending on the ADS
mode selected (Y page 180), the Active Curve
System also changes the ...