Parking lamp/standing lamp
- Switch off the lights.
- Open the hood.
- Remove the headlamp cover ().
- Left-hand headlamp: detach the washer fluid reservoir ().
- Turn housing cover 1 counter-clockwise and pull it out.
- Pull out bulb holder 2.
- Take the bulb out of bulb holder 2.
- Insert the new bulb into bulb holder 2.
- Insert bulb holder 2.
- Align housing cover 1 and turn it clockwise until it engages.
- Left-hand headlamp: fasten the washer fluid reservoir ().
- Install the headlamp cover ().
See also:
Automatic transmission
WARNING
It is dangerous to shift the automatic
transmission out of parking position P or
neutral position N if the engine speed is
higher than idle speed. If your foot is not firmly
o ...
Restarting the tire pressure loss
warning system
Restart the tire pressure loss warning system
if you have:
- changed the tire pressure
- changed the wheels or tires
- mount new wheels or tires
– Before restarting, consult the Tire and
Loadi ...
System language settings
This function allows you to determine the
language for the menu displays and the
navigation messages. The selected language
affects the characters available for entry.
When you set the system l ...