High-beam headlamps (halogen headlamps)
- Switch off the lights.
- Open the hood.
- Remove the headlamp cover ().
- Left-hand headlamp: detach the washer fluid reservoir ().
- Turn housing cover 1 counter-clockwise and pull it out.
- Press the handle of bulb holder 2 in the direction of the arrow until bulb holder 2 is released.
- Take out the handle with bulb holder 2.
- Take the bulb out of bulb holder 2.
- Insert the new bulb into bulb holder 2. Lug 3 of the bulb must be pointing upward.
- Insert bulb holder 2.
- Push the handle of bulb holder 2 in the opposite direction from the arrow until holder 2 engages.
- Align housing cover 1 and turn it clockwise until it engages.
- Left-hand headlamp: fasten the washer fluid reservoir ().
- Install the headlamp cover ().
See also:
Engine oil viscosity
Viscosity describes the flow characteristics
of a fluid. If an engine oil has a high viscosity,
this means that it is thick; a low viscosity
means that it is thin.
Select an engine oil with an ...
Checklist after driving off-road
WARNING
If you notice sudden significant vibrations or
unusual handling performance or if you
suspect that damage has occurred to the
vehicle, you should activate the hazard
warning l ...
Sunblinds on the rear side windows
To extend: pull the
roller sunblind out by
tab 1 and hook it onto retainers 2 at the
top of the window.
Always guide the roller sunblind
by hand.
Do not let it snap back suddenly as this ...