Removing/installing the headlamp cover

You must remove the headlamp cover in the engine compartment before you can replace the bulbs in the headlamp.

  1. To remove: press retaining clip 1 in the direction of the arrow.
  2. Pull cover 2 forward underneath cover 3 and remove.
  3. To install: slide cover 2 under cover 3. Connect the two covers by inserting the tongue into the groove.
  4. Press cover 2 until retaining clip 1 engages.
    See also:

    Problems with the side windows
    Problem: a side window cannot be closed because it is blocked by objects, e.g. leaves in the window guide. Remove the objects. Close the side window. Problem: a side window cannot be closed ...

    Problems with fuel and the fuel tank
    Problem Possible causes/consequences and Solutions Fuel is leaking from the vehicle. Risk of explosion or fireThe fuel line or the fuel tank is defective. Turn the ...

    Headlamps fogged up on the inside
    The headlamps may fog up on the inside if there is high atmospheric humidity. - Drive with the headlamps switched on. The level of moisture diminishes, depending on the length of the journey and ...