Storing settings
With the memory function, you can store up to three different settings, e.g. for three different people.
The following settings are stored as a single memory preset:
- position of the seat, backrest and head restraint
- driver's side: steering wheel position
- driver's side: position of the exterior mirrors on the driver's and front-passenger sides
WARNING
Do not activate the memory function while driving. Activating the memory function while driving could cause the driver to lose control of the vehicle.
- Adjust the seat ().
- On the driver's side, adjust the steering wheel () and the exterior mirrors ().
- Press memory button M and one of the storage position buttons 1, 2 or
3 within three seconds.
The settings are stored in the selected preset position. A tone sounds when the settings have been completed.
See also:
Snow chains
For safety reasons, Mercedes-Benz
recommends that you only use snow chains
which have been specially approved for your
vehicle by Mercedes-Benz, or are of a
corresponding standard of quality.
...
Setting a speed
WARNING
Keep in mind that it may take a brief moment
until the vehicle has made the necessary
adjustments.
Increase or decrease the set vehicle speed to
a value that the prevailing road co ...
Vehicles with automatic transmission
Apply the electric parking brake.
Shift the transmission to position P.
Using the SmartKey
Turn the SmartKey to position 0 in the
ignition lock and remove it.
The immobilizer is activated.
...