Removing and installing rear head restraints
WARNING
Occupants should only travel sitting on seats which have the head restraints installed. In the event of an accident, this reduces the risk of injury for passengers seated in the rear compartment.
- To remove: pull the head restraint up to the stop.
- Press release catch 1 and pull the head restraint out of the guides.
- To re-install: insert the head restraint so that the notches on the bar are on the left when viewed in the direction of travel.
- Push the head restraint down until you hear it engage in position.
See also:
Underinflated or overinflated tires
Underinflated tires
WARNING
Follow recommended tire inflation pressures.
Do not underinflate tires. Underinflated tires
wear excessively and/or unevenly, adversely
affect handling and fuel ...
Storing the current speed or calling up
the last stored speed
WARNING
The set speed stored in memory should only
be set again if prevailing road conditions and
legal speed limits permit. Possible
acceleration or deceleration differences
arising from r ...
Introduction
SRS consists of:
• the SRS warning lamp
• air bags
• air bag control unit (with crash sensors)
• Emergency Tensioning Devices
• belt force limiters
SRS reduces the risk of occupants coming
in ...