Adjusting the seats

of a front door being opened. Vehicles without Memory function: the seats can be adjusted within three minutes of a front door being opened.

The time period starts over again if, within these three minutes, you:

  • open or close a front door
  • insert the SmartKey into the ignition lock or remove it from the ignition lock
  • switch the ignition on or off

If the SmartKey is in position 2 in the ignition lock, the seats can be adjusted at any time.

Depending on the equipment, the seat adjustment buttons are either located on the side of the seat or on the door control panel.

  1. Seat cushion angle
  2. Seat height
  3. Seat fore-and-aft adjustment
  4. Backrest angle

  1. Seat cushion angle
  2. Seat height
  3. Seat fore-and-aft adjustment
  4. Backrest angle
  5. Head restraint height

Adjusting the head restraints You can store the seat settings using the memory function ().

    See also:

    Cleaning the plastic trim
    WARNING When cleaning the steering wheel boss and dashboard, do not use cockpit sprays or cleaning agents containing solvents. Cleaning agents containing solvents cause the surface to become ...

    Attaching the roof carrier
    – Secure the roof carrier to roof rails 1. – Observe the manufacturer's installation instructions. ...

    Vehicle identification number (VIN)
    The vehicle identification number (VIN) can be found in the following locations: on the vehicle identification plate () on the lower edge of the windshield () In addition to being stamped on ...