Activating
- To open the tailgate: pull the handle on the tailgate.
- To stop the opening procedure at the desired position: press the closing button () in the tailgate or pull the handle on the outside of the tailgate again.
- To store the position: press and hold the closing button in the tailgate until you hear a short tone.
The opening angle limiter is activated. The tailgate will now stop in the stored position when opening.
If you wish to open the tailgate fully, pull the handle of the tailgate again
after it has stopped automatically. This does not delete the stored position.
See also:
Selecting the ideal shift range
Press the selector lever to the
left towards D– and hold it in position.
or
Pull the left-hand steering wheel
paddle shifter and hold it in position.
The automatic transmission shifts to the ...
Making adjustments in 1 mph (Canada:1 km/h) increments
► Briefly press the cruise control lever
to the
pressure point, up 1 for a higher speed or
down 2 for a lower speed.
The last speed stored is increased or
reduced. ...
Xenon bulbs
If your vehicle is equipped with Xenon bulbs, you can recognize this by the following:
the cone of light from the Xenon bulbs moves from the top to the bottom and back
again when you start the eng ...