Tire ply composition and material used
Describes the number of plies or the number of layers of rubber-coated fabric in the tire tread and sidewall. These are made of steel, nylon, polyester and other materials.
See also:
Correct driver's seat position
Observe the safety guidelines on seat
adjustment.
► Check whether you have adjusted seat 3
properly.
Electrical seat adjustment
When adjusting the seat, make sure:
• you are as far aw ...
Windshield/headlamp cleaning system
WARNING
Washer solvent/antifreeze is highly flammable. Do not spill washer solvent/ antifreeze
on hot engine parts, because it may ignite and burn. You could be seriously burned.
Use MB Summe ...
Tire pressure of at least 180 kPa
(1.8 bar/26 psi) is not reached
If, after five minutes, a pressure of 180 kPa
(1.8 bar/26 psi) has not been achieved:
– Switch off the tire inflation compressor.
– Unscrew the filler hose from the valve of
the faulty tire.
– ...