Example: step 1 to 3

The following table shows examples on how to calculate total and cargo load capacities with varying seating configurations and number and size of occupants. The following examples use a load limit of 1500 lbs. This is for illustration purposes only. Make sure you are using the actual load limit for your vehicle stated on the vehicle’s Tire and Loading Information placard.

The higher the weight of all the occupants, the smaller the maximum load for

The higher the weight of all the occupants, the smaller the maximum load for luggage.

Further information can be found under "Towing a trailer".

    See also:

    Kickdown
    Vehicles with an AMG engine: it is not possible to use kickdown in manual drive program M. You can also use kickdown for maximum acceleration in manual drive program M. Vehicles for USA: f ...

    "Coupling up a trailer" function
    This function is only available on vehicles with a trailer tow hitch. 1 Center of the vehicle on the red guide line approximately 10 in (0.25 m) away from the rear area 2 Center of the vehic ...

    GAWR (Gross Axle Weight Rating)
    The GAWR is the maximum permissible axle weight. The actual load on an axle must never exceed the gross axle weight rating. The gross axle weight rating can be found on the vehicle identificat ...