Checking tire pressure manually
To determine and set the correct tire pressure, proceed as follows:
Remove the valve cap of the tire that is to be checked.
Press the tire pressure gauge securely onto the valve.
Read the tire pressure and compare it with the recommended value on the Tire and Loading Information placard on the B-pillar on the driver's side of your vehicle.
If necessary, increase the tire pressure to the recommended value.
If the tire pressure is too high, release air by pressing down the metal pin in the valve using the tip of a pen, for example. Then check the tire pressure again using the tire pressure gauge.
Screw the valve cap onto the valve.
Repeat these steps for the other tires.
See also:
Mounting a new wheel
WARNING
Always replace wheel bolts that are damaged
or rusted.
Never apply oil or grease to wheel bolts.
Damaged wheel hub threads should be
repaired immediately. Do not continue to
drive un ...
Menu overview
The number of menus shown depends on the optional equipment in the vehicle.
Function
1 Trip menu
2 Navi menu (navigation instructions)
3 Audio menu
4 Tel menu (telephone)
5 DriveAssist men ...
LATCH-type (ISOFIX) child seat anchorsin the rear
WARNING
Children that are too large for a child restraint
must travel in seats using normal seat belts.
Position shoulder belt across the chest and
shoulder, not face or neck.
In orde ...