Tire tread

WARNING
Although the applicable federal motor vehicle safety laws consider a tire to be worn when the tread wear indicators (TWI) become visible at approximately 1/16 in (1.6 mm), we recommend that you do not allow your tires to wear down to that level. As tread depth approaches 1/8 in (3 mm), the adhesion properties on a wet road are sharply reduced.
Depending upon the weather and/or road surface (conditions), the tire traction varies widely.

Do not use tires that are excessively worn as the tire traction on wet road surfaces decreases significantly when the tread depth is less than 1/8 inch (3 mm).

Tread wear indicators (TWI) are required by law. Six indicators are positioned on the tire tread. They become visible as soon as a tread depth of approximately 1/16 inch (1.6 mm) has been reached. If this is the case, the tire is so worn that it must be replaced.

The recommended tread depth for summer tires is at least 1/8 inch (3 mm). The recommended tread depth for winter tires is at least 1/6 inch (4 mm).

Bar marking 1 for tread wear is integrated

Bar marking 1 for tread wear is integrated into the tire tread.

    See also:

    Brake fluid
    WARNING Over a period of time, the brake fluid absorbs moisture from the air; this lowers its boiling point. If the boiling point of the brake fluid is too low, vapor pockets may form in th ...

    Dashboard fuse box
    There is a fuse box located on both the driver's side and the front-passenger side. Do not use a pointed object such as a screwdriver to open the cover in the dashboard. You could damage the ...

    Suspension tuning
    The electronically controlled ABC suspension system works continuously. This improves driving safety and comfort. The ABC suspension system is tuned individually to each wheel and depends on: ...