Installing the towing eye

tool kit. Remove the towing eye from the vehicle tool kit.

WARNING
The exhaust tail pipe may be hot. You could burn yourself if you touch the tail pipe. Be particularly careful when removing the rear cover.

The mountings for the removable towing eyes are located in the bumpers. They are at the front and at the rear, under the covers.

Press the mark on cover 1 inwards in the

direction of the arrow. Press the mark on cover 1 inwards in the direction of the arrow.

Screw the towing eye in clockwise to the Take cover 1 off the opening.

stop and tighten it. Screw the towing eye in clockwise to the stop and tighten it.

    See also:

    Fast forward/rewind
    Slide and hold the COMAND controller until the desired position has been reached. You see the navigation menu. ...

    Cleaning the exhaust tail pipes
    Impurities combined with the effects of road grit and corrosive environmental factors may cause flash rust to form on the surface. You can restore the original shine of the exhaust tail pipe b ...

    Adaptive Highbeam Assist
    You can use this function to set the headlamps to change between low beam and high beam automatically. The system recognizes vehicles with their lights on, either approaching from the opposite ...