Cleaning the display

it is switched off and has cooled down. Before cleaning the display, make sure that it is switched off and has cooled down.

commercially-available microfiber cloth Clean the display surface using a commercially-available microfiber cloth and TFT/LCD display cleaner.

microfiber cloth. Dry the display surface using a dry microfiber cloth.

following: For cleaning, do not use any of the following:
• alcohol-based thinner or gasoline
• abrasive cleaning agents
• commercially-available household cleaning agents

These may damage the display surface. Do not put pressure on the display surface when cleaning. This could lead to irreparable damage to the display.

    See also:

    Maximum gradient-climbing capability
    If the load on the front axle is reduced when pulling away on a steep uphill slope, the front wheels have a tendency to spin. 4ETS recognizes this and brakes the wheels accordingly. The rear wh ...

    Destination or area of destination reached
    When you reach your destination, COMAND displays a checkered flag and route guidance is automatically ended. For certain points of interest (e.g. airports), the Destination Reached display is s ...

    Engine
    Display messages   Top Up Coolant See Operator's Manual Possible causes/consequences and ► Solutions The coolant level is too low. ► Add coolant, observing the warning notes ...