Checking the oil level using the onboard computer
On vehicles with a 12-cylinder engine, the oil level can be checked using the on-board computer. On all other models, the dipstick must be used to check the engine oil level.
Park the vehicle on a level surface.
To check the oil level with the engine at normal operating temperature, switch the engine off and wait for approximately five minutes.
Make sure that the SmartKey is in position 2 in the ignition lock.
Press the or button to select the Service menu.
Press the or button to select Engine Oil Level.
Press the button.
The multifunction display shows the following message: Engine Oil Level Measuring Now Measurement correct only if vehicle level.
The measurement takes a few seconds. You will see one of the following messages in the multifunction display:
• Engine Oil Level OK
• Add 1.0 l Engine Oil At Next Refueling
• Add 1.5 l Engine Oil At Next Refueling
• Add 2.0 l Engine Oil At Next Refueling
Add oil if necessary.
If the engine is at normal operating temperature and the Engine Oil Level Reduce Oil Level message appears, the engine oil level is too high.
Have excess oil siphoned off.
Do not add too much oil. Adding too much oil can result in damage to the engine or the catalytic converter. Have excess oil siphoned off.
If the For Engine Oil Level Ignition Must be On message appears:
Turn the SmartKey to position 2 in the ignition lock.
If the Need More Time to Check Engine Oil Level message appears:
If the engine is at normal operating temperature: repeat the measurement after about five minutes.
If the engine is not at normal operating temperature (e.g. if the engine was only started briefly): repeat the measurement after about 30 minutes.
If the Engine Oil Level Not When Engine On message appears:
Switch off the engine.
If the engine is at normal operating temperature: wait about five minutes before carrying out the measurement.
If the engine is not at normal operating temperature, e.g. if the engine was only started briefly: wait about 30 minutes before carrying out the measurement.
If you wish to cancel the measurement, press the button on the multifunction steering wheel.
See also:
EBD (electronic brake force
distribution)
Observe the "Important safety
notes"
section.
EBD monitors and controls the brake
pressure on the rear wheels to improve
driving stability while braking.
WARNING
If EBD has malf ...
Dashboard fuse box
Do not use a pointed object such as a
screwdriver to open the cover in the
dashboard. You could damage the
dashboard or the cover.
► To open: pull cover 1 outwards in
the
direction ...
Folding the exterior mirrors in or out automatically
This function is only available in vehicles for Canada.
If the "Fold in mirrors when locking" function is activated in the on-board computer
():
the exterior mirrors fold in automatic ...