Floormat on the driver's side

WARNING
Whenever you are using a floormat, make sure there is enough clearance and that the floormat is securely fastened.
The floormat should always be securely fastened using the fastening equipment.
Before driving off, check that the floormat is securely in place and adjust it if necessary. A loose floormat could slip and hinder proper functioning of the pedals.
Do not place several floormats on top of each other as this may impair pedal movement.

Slide the seat backwards.

To install: place the floormat in the Slide the seat backwards.

footwell. To install: place the floormat in the footwell.

To remove: pull the floormat off Press studs 1 onto retainers 2.

retainers 2. To remove: pull the floormat off retainers 2.

Infrared reflective windshield Remove the floormat.

    See also:

    Opening and closing
    Overhead control panel 1 To raise 2 To open 3 To close - Turn the SmartKey to position 1 or 2 in the ignition lock. - Press or pull the switch in the corresponding direction. If you ...

    Switching on/off
    The three blue indicator lamps in the buttons indicate the ventilation level you have selected. If the battery voltage is too low, the seat ventilation may switch off. Make sure that the S ...

    Treadwear indicators
    Narrow bars (tread wear bars) that are distributed over the tire tread. If the tire tread is level with the bars, the wear limit of 1/16 in (1.6 mm) has been reached. ...