Points to observe before use

The sockets can be used for accessories, e.g.

lamps or mobile phone chargers with a maximum current draw of 180 W (15 A).

If you use the sockets for long periods when the engine is switched off, the battery may discharge.

ignition lock. Turn the SmartKey to position 1 in the ignition lock.

on-board voltage does not drop too low. If An emergency cut-out ensures that the on-board voltage does not drop too low. If the on-board voltage is too low, the power to the sockets is automatically cut. This ensures that there is sufficient power to start the engine.

    See also:

    Cleaning the trailer tow hitch
    The ball coupling must be cleaned if it becomes dirty or corroded. Remove rust on the ball of the ball coupling, e.g. with a wire brush. Remove dirt with a clean, lint-free cloth or a brush. A ...

    Problems with the seat heating
    The seat heating has switched off prematurely or cannot be switched on. The vehicle's electrical system voltage is too low because too many electrical consumers are switched on. •► Swit ...

    Important safety notes
    WARNING In order to avoid possible loss of vehicle control, all seat, head restraint, steering wheel and rear view mirror adjustments, as well as fastening of seat belts, must be done before ...