Activating/deactivating PRE-SAFE® Brake
PRE-SAFE® Brake is only available in vehicles with DISTRONIC PLUS.
Press the 
or
button on the
steering wheel to select the DriveAssist
menu.
Press 
or
to select PRE-SAFE
Brake.
Press 
.
The current selection is displayed.
To activate/deactivate: press
again.
When PRE-SAFE® Brake is
activated, the multifunction display shows
the 
symbol as long as the HOLD
function is not activated.
See also:
Resetting to factory settings
For safety reasons, the Daytime Running
Lamps function in the Lighting submenu is
only reset when the engine is switched off.
► Press
on the steering wheel
to select the Settings menu.
...
System self-test
After you have switched on the ignition, the
system carries out a self-diagnosis.
WARNING
A malfunction in the system has been
detected if one of the following conditions
occurs:
• the indi ...
Hydroplaning
If water has accumulated to a certain depth
on the road surface, there is a danger of
hydroplaning occurring, even if:
- you drive at low speeds.
- the tires have adequate tread depth.
For this ...