Activating the HOLD function

are met. Make sure that the activation conditions are met.

Depress the brake pedal.

Quickly depress the brake pedal further

until HOLD display 1 appears in the Quickly depress the brake pedal further until HOLD display 1 appears in the instrument cluster.

The HOLD function is activated. You can release the brake pedal.

time does not activate the HOLD function, If depressing the brake pedal the first time does not activate the HOLD function, wait briefly and then try again.

WARNING
The vehicle's brakes are applied when the HOLD function is activated. For this reason, deactivate the HOLD function if the vehicle is to be set in motion by other means (e.g. in a car wash or by towing).

    See also:

    Activating DISTRONIC PLUS
    Activation conditions In order to activate DISTRONIC PLUS, the following conditions must be fulfilled: - the engine must be started. It may take up to two minutes after pulling away before DIS ...

    2012 Mercedes-Benz CLS-Class Review
    If style is important to luxury shoppers, the 2012 Mercedes-Benz CLS-Class has the upper hand over other sedans on the market. The radically shaped four-door — it's sometimes called a coupe becaus ...

    Brake fluid
    WARNING   The brake fluid constantly absorbs moisture from the air; this lowers its boiling point. If the boiling point of the brake fluid is too low, vapor pockets may form in the brake ...