General information
The program selector button influences:
• the drive program
• the AIRMATIC or ABC suspension settings
• the engine management
Program selector button
Program selector button on AMG vehicles
In AMG vehicles, drive program E is called drive program C.
For further information on the automatic
drive program.
AMG vehicles: only change from automatic drive program C or S to manual drive program M when the vehicle is stationary.
Press program selector button 1
repeatedly until the letter for the desired
gearshift program appears in the
multifunction display.
When the engine is started, the automatic
transmission always switches to automatic
drive program E (drive program C in AMG
vehicles).
See also:
Important safety notes
See the "Important safety notes"
section.
If ESP® detects that the vehicle is deviating
from the direction desired by the driver, one
or more wheels are braked to stabilize the
veh ...
Setting the center vents in the rear compartment
ear-compartment air vent thumbwheel
ear-compartment air vent, right
ear-compartment air vent, left
To open/close: turn thumbwheel 1 up or down. ...
High-beam headlamps (halogen
headlamps)
- Switch off the lights.
- Open the hood.
- Turn housing cover 1 counter-clockwise
and pull it out.
- Pull lever 3 upwards and remove bulb
holder 2.
- Take the bulb out of bulb holder 2.
- ...