Deactivating/activating the ECO start/stop function
General information
You can deactivate and activate the ECO start/stop function using COMAND.
You can also use the programmable
button to activate and
deactivate the ECO start/stop function if
you have assigned this function to the
button.
Deactivating
Deactivate the ECO start/stop function
using COMAND:
The 
ECO symbol goes out and the
Stop/Start deactivated display
message is shown in the multifunction
display.
If drive program S or M has been selected,
the ECO start/stop function is always
deactivated.
Activating
Activate the ECO start/stop function using
COMAND.
The ECO symbol and the Stop/
Start active display message are shown
in the multifunction display.
If not all conditions for automatic engine switch-off are fulfilled, the Stop/Start inactive message appears.
If you activate the ECO start/stop
function in drive program S or M, drive
program C is selected automatically.
See also:
High-beam flasher
To switch on: turn the SmartKey in the
ignition lock to position 1 or 2 or start the
engine.
Pull the combination switch in the direction
of arrow 3. ...
Transferring data to another system
(vehicle)
Insert/connect the storage medium (SD
card or USB stick) with the saved data into/
to the relevant interface.
Select Vehicle in the main function bar by
turning the COMAND controller and
p ...
Active Blind Spot Assist
Important safety notes
Active Blind Spot Assist uses a radar sensor
system to monitor the side areas of your
vehicle which are in back of the driver. A
warning display in the exterior mirrors d ...