Replacing the wiper blades
Moving the wiper blades to a vertical position
Vehicles without KEYLESS-GO
Turn the SmartKey to position 1 or 2 in the ignition lock.
Set the windshield wipers to position .
When the wiper arms have reached a vertical position, turn the SmartKey to position 0 and remove it from the ignition lock.
Vehicles with KEYLESS-GO
Switch off the engine.
Remove your foot from the brake pedal.
Set the windshield wipers to position .
Press the Start/Stop button repeatedly until the windshield wipers start.
When the wiper arms have reached a vertical position, press the Start/Stop button.
Removing the wiper blades
Fold the wiper arm away from the windshield until it engages.
Set the wiper blade at right angles to the wiper arm.
Remove the wiper blade from the retaining pin on the wiper arm in the direction of the arrow.
Installing the wiper blades
Push the new wiper blade onto the retaining pin on the wiper arm in the opposite direction to the arrow.
Make sure that the wiper blade slides fully onto the retaining pin on the wiper arm.
Turn the wiper blade parallel to the wiper arm.
Fold the wiper arm back onto the windshield.
See also:
Switching the topographical map on/
off
The topographical map uses different colors
to depict elevation. The color key generally
reflects the topography's dominant
vegetation or the ground's perceived color
when seen from the air, f ...
Vehicle identification p
Even if you have calculated the total load
carefully, you should still make sure that the
gross vehicle weight rating and the gross axle
weight rating are not exceeded. Details can
be found on the ...
Opening/closing automatically from inside
WARNING
Maintain sight of the area around the rear of the vehicle while operating the
tailgate with the door-mounted remote tailgate switch. Monitor the opening procedure
carefully to make s ...