High-beam spot lamp (vehicles with halogen daytime running lamps)
Switch off the lights.
Open the hood.
Turn housing cover 1 counter-clockwise
and pull it out.
Turn bulb holder 2 counter-clockwise and
pull it out.
Take the bulb out of bulb holder 2.
Insert the new bulb into bulb holder 2.
Insert bulb holder 2.
Left-hand headlamp: cable outlet 3 must be pointing up and to the right.
Right-hand headlamp: cable outlet 3 must be pointing down and to the left.
Turn bulb holder 2 clockwise.
Handle 4 of bulb holder 2 is horizontal.
Align housing cover 1 and turn it
clockwise until it engages.
See also:
Product information
Mercedes-Benz recommends that you use
genuine Mercedes-Benz parts, conversion
parts and accessories that have been
approved for the type of vehicle.
Mercedes-Benz tests genuine parts as well as
...
Exterior mirror out of position
If an exterior mirror has been pushed out of
position, proceed as follows:
•► Vehicles without electrically folding
exterior mirrors: move the exterior mirror
into the correct position ma ...
Checklist after driving off-road
WARNING
If you notice sudden significant vibrations or unusual handling performance or
if you suspect that damage has occurred to the vehicle, you should activate the
hazard warning lamps, g ...