Switching to video AUX mode
Select Video in the main function bar by sliding and turning the COMAND controller and press to confirm.
If video AUX mode was the last mode selected, it will now be active.
If another video source is switched on, you can now switch to video AUX mode in the video menu.
Select Video and press to confirm.
Select AUX and press to confirm.
The video AUX menu appears. You will hear and see the content of the external video source if it is connected and switched to playback.
For details on how to operate the external video source, see the respective device's operating instructions.
See also:
Using the TIREFIT kit
You can use the TIREFIT kit to seal small
punctures, particularly those in the tire tread.
You can use TIREFIT at outside temperatures
down to -4 °F (-20 °C).
WARNING
TIREFIT is a limited repa ...
Activating/deactivating the residual
heat function
It is possible to make use of the residual heat
of the engine to continue heating the
stationary vehicle for up to 30 minutes after
the engine has been switched off. The heating
time depends o ...
Rolling with the engine switched off
WARNING
There is no power assistance for the steering
and the brake when the engine is not running.
Steering and braking requires significantly
more effort and you could lose control of the
v ...