Basic telephone menu (Bluetooth® interface)

function button once or twice. To call up the telephone menu: press the If the mobile phone is ready for use, the function button once or twice.

If the mobile phone is ready for use, the following display appears:

Example display: telephone basic menu (Bluetooth® interface)
Example display: telephone basic menu (Bluetooth® interface)

1 Network provider icon
2 Signal strength of mobile phone network
3 Receiver icon or
4 To display the COMAND phone book
5 To display call lists
6 Character bar with characters for phone number entry
7 Bluetooth® name of the currently connected mobile phone

on the mobile phone connected. Displays 1 and 2 are shown, depending on the mobile phone connected.
Bars 2 display the current signal strength of the mobile phone network. If all bars are filled, you have optimum reception. If all bars are empty, there is very poor reception or none at all.
Receiver icon 3 shows whether a call is active/being connected . or not Reception and transmission volume.

    See also:

    Important notes on use
    To function properly, BlueTEC exhaust gas aftertreatment must be operated with the reducing agent DEF. Adding DEF is one of the tasks performed during maintenance. Under normal operating condi ...

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are ...

    Storing and maintaining the current speed
    You can store the current speed if you are driving faster than 20 mph (30 km/h). Accelerate the vehicle to the desired speed. Briefly press the cruise control lever up 1 or down 2. Remove your ...