Cordless headphones
Overview
The cordless headphones for the rear compartment can be recognized by the "DIGITAL AUDIO" inscription on the battery compartment cover and by the fact that there is no SPLITVIEW symbol.
1 Volume control
2 To select a screen for the headphones
3 Battery compartment cover
4 To switch the cordless headphones on/off
5 Indicator lamp with various displays
Gently pull both sides of the headphones out and adjust the fit of the headphones by pulling the headband in the direction of the arrow.
Switching the cordless headphones on/ off
Press button 4.
Depending on the previous status, the headphones are switched on or off. To save the battery, the headphones are switched off automatically if they do not receive a signal within three minutes.
Adjusting the volume of the headphones
Turn volume control 1 until you have reached the desired volume.
If you have connected corded headphones to a rear-compartment screen, you can adjust the volume by pressing buttons 7 on the remote control.
Selecting a screen for the headphones
Move push slider 2 to L (left-hand screen) or R (right-hand screen).
Indicator lamp displays
The indicator lamp displays the following possible stati for the batteries and headphones:
Connecting additional headphones
You can connect an additional set of corded headphones to each rear-compartment screen.
See also:
Activating
To open the tailgate: pull the handle on the tailgate.
To stop the opening procedure at the desired position: press the closing
button () in the tailgate or pull the handle on the outside of t ...
Low-beam headlamps (halogen
headlamps)
- Remove the cover in the front wheel arch.
- Turn housing cover 1 counter-clockwise
and pull it out.
- Turn bulb holder 2 counter-clockwise and
pull it out.
- Take the bulb out of bulb holde ...
Fuel filler flap emergency release
WARNING
Avoid contact with the vehicle walls as they
may contain sharp edges. Otherwise, you
could injure yourself while releasing the fuel
filler flap.
The emergency release is locat ...