Adjusting the sound settings
Calling up the sound menu
You can make various sound settings for the different audio and video sources. This means that it is possible to set more bass for radio mode than for audio CD mode, for example.
You can call up the respective sound menu from the menu of the desired mode.
The example describes how to call up the sound menu in radio mode.
Press the function button.
The radio display appears. You will hear the last station played on the last waveband.
Select Sound by sliding
and turning
the COMAND controller and press
to confirm.
You can now set the treble and bass or the
balance and fader for radio mode.
Adjusting treble and bass
Select Treble or Bass in the sound menu
by turning the COMAND controller
and press to confirm.
An adjustment scale appears.
To set the treble
1 Last setting selected
2 Current setting
Select a setting by turning
the
COMAND controller and press to
confirm.
The setting is stored and you exit the menu.
Adjusting balance and fader
With the Balance function, you can control whether the sound is louder on the driver's or front-passenger side.
The Fade function is used to control whether the sound is louder in the front or the rear of the vehicle.
Select Balance/Fader in the sound menu by turning and press to confirm.
1 Current setting
Select a setting by sliding or
the
COMAND controller and press to
confirm.
The setting is stored and you exit the menu.
See also:
Windshield/headlamp cleaning
system
WARNING
Washer solvent/antifreeze is highly
flammable. Do not spill washer solvent/
antifreeze on hot engine parts, because it may ignite and burn. You could be
seriously
burned.
Use MB ...
Maximum load rating
WARNING
Do not overload the tires by exceeding the
specified load limit as indicated on the Tire
and Loading Information placard on the
driver's door B-pillar. Overloading the tires
can over ...
Windows fogged up on the inside
- Activate the cooling with air
dehumidification function.
- Activate automatic mode .
- If the windows continue to fog up, activate
the defrosting function.
You should only select this s ...