Setting and storing the parking position
You can position the front-passenger side exterior mirror in such a way that you can see the rear wheel on that side as soon as you engage reverse gear. You can store this position.
Make sure that the vehicle is stationary and
that the SmartKey is in position 2 in the
ignition lock.
Press button 3 for the exterior mirror on
the front-passenger side.
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the preset parking position.
Use adjustment button 2 to adjust the
exterior mirror to a position that allows you
to see the rear wheel and the curb.
The parking position is stored.
If you shift the transmission to another position, the exterior mirror on the frontpassenger side returns to the driving position.
You can also store the parking position using memory button M 1.
Make sure that the SmartKey is in
position 2 in the ignition lock.
With the exterior mirror on the frontpassenger
side activated, use
adjustment button 2 to adjust the
exterior mirror to a position which
allows you to see the rear wheel and
the curb.
Press memory button M 1 and one of
the arrows on adjustment button 2
within three seconds.
The parking position is stored if the
exterior mirror does not move.
If the mirror moves out of position, repeat the steps.
See also:
Stowage compartments in the rear
Stowage compartment in the rear
Do not sit or lean your bodyweight on the armrests when they are folded out
as you could damage them.
Close the cover of the stowage compartment before foldin ...
Using the SmartKey
The SmartKey must be close to the
driver's door handle.
•► Point the tip of the SmartKey at the driver's
door handle.
•► Press and hold the button until
the
side windows and the ...
BAS (Brake Assist System)
Observe the "Important safety notes" section ().
BAS operates in emergency braking situations. If you depress the brake pedal
quickly, BAS automatically boosts the braking force, thus ...