Switching on/off
The steering-wheel heating heats the leather areas of the steering wheel.
Make sure that the SmartKey is in position
2 in the ignition lock.
To switch on/off: turn the lever in the
direction of arrow 1 or 2.
Indicator lamp 3 lights up or goes out.
Vehicles without KEYLESS-GO: when you remove the SmartKey from the ignition lock, the steering wheel heating is deactivated.
Vehicles with KEYLESS-GO: when you switch off the ignition and open the driver's door, the steering wheel heating is deactivated.
The steering wheel heating is deactivated when the temperature in the vehicle interior is higher than 86 °F (30 °C).
The steering wheel heating is switched off automatically after about 24 minutes.
See also:
Starting procedure with the SmartKey
To start the engine using the SmartKey instead of KEYLESS-GO, pull the Start/
Stop button out of the ignition lock.
X Turn the SmartKey to position 3 in the ignition lock () and release
it as ...
"Coupling up a trailer" function
This function is only available on vehicles with
a trailer tow hitch.
1 Center of the vehicle on the red guide line
approximately 10 in (0.25 m) away from
the rear area
2 Center of the vehic ...
Tire characteristics
Tire data is vehicle-specific and may
deviate from the data in the example.
This information describes the tire cord and
the number of layers in sidewall 1 and under
the tread 2. ...