Switching on/off
The three blue indicator lamps in the buttons indicate the ventilation level you have selected.
If the battery voltage is too low, the seat
ventilation may switch off.
Make sure that the SmartKey is in position
2 in the ignition lock.
To switch on: press button 1 repeatedly
until the desired ventilation level is set.
You can open the side windows and the
sliding sunroof using the "Convenience
opening" feature. The seat
ventilation of the driver's seat
automatically switches to the highest level.
To switch off: press button 1 repeatedly
until all the indicator lamps go out.
See also:
Telescopic rod
The telescopic rod can be used to secure the
load against the rear seats to prevent it from
moving around.
– To install: insert one bracket 2 into both
the left and the right loading rails ...
LATCH-type (ISOFIX) child seat anchors
in the rear
WARNING
Children that are too large for a child restraint
must travel in seats using normal seat belts.
Position shoulder belt across the chest and
shoulder, not face or neck.
In order to atta ...
Vehicle equipment
This Operator's Manual describes all models
and all standard and optional equipment of
your vehicle available at the time of
publication of the Operator's Manual.
Country-specific differences a ...