Operating the front roller sunblind
WARNING
When opening or closing the front roller
sunblind, make sure no one is in danger of
being injured by the opening or closing
procedure.
The front roller sunblind is equipped with
automatic operation and the anti-entrapment
feature. If the movement of the front roller
sunblind is blocked during the closing
procedure, the front roller sunblind will stop
and retract slightly.
The opening or closing of the front roller
sunblind can be immediately halted by
releasing the roof panel switch or, if the roof
panel switch was moved past the resistance
point and released, by moving the roof panel
switch in any direction.
Overhead control panel
1 To open
2 To open
3 To close
Turn the SmartKey to position 1 or 2 in the
ignition lock.
Press or pull the switch in the
corresponding direction.
If you press the switch beyond the point of resistance, an automatic opening/closing process is started in the corresponding direction. You can stop automatic operation by operating the switch again.
See also:
SRS warning lamp
SRS functions are checked regularly when you switch on the ignition and when
the engine is running. Therefore, malfunctions can be detected in good time.
The SRS warning lamp in the instrument
c ...
Superlative comfort whatever the conditions
The welcoming interior with its top-quality materials provides passengers
with that feel-good atmosphere as only Mercedes knows how, with more than ample
space for up to seven passengers. The GL-C ...
General notes
When you lock the vehicle, you can simultaneously:
close the side windows
close the panorama roof with power tilt/ sliding panel
On vehicles with a panorama roof with power tilt/sliding panel ...