Opening and closing

Overhead control panel
Overhead control panel

1 To raise
2 To open
3 To close/lower

The panorama roof with power tilt/sliding panel can only be operated when the roller sunblind is open.

opens first when the panorama roof with If the front roller sunblind is closed, it opens first when the panorama roof with power tilt/sliding panel is raised.

ignition lock. Turn the SmartKey to position 1 or 2 in the ignition lock.
corresponding direction. Push or pull the corresponding direction. switch in the corresponding direction.

the If you press the the switch beyond the point of resistance, an automatic opening/closing process is started in the corresponding direction. You can stop automatic operation by operating the switch again.

    See also:

    Slippery road surfaces
    WARNING The outside temperature indicator is not designed to serve as an ice-warning device and is therefore unsuitable for that purpose. Indicated temperatures just above the freezing point ...

    Important safety notes
    WARNING For safety reasons, switch off the windshield wipers and remove the key from the ignition lock before changing the wiper blades (vehicles with KEYLESS-GO: make sure that the on-bo ...

    Headlamp cleaning system
    The headlamps are cleaned automatically if the "Wipe with washer fluid" function is operated ten times while the lights are on and the engine is running ...