Resetting

Reset the sliding sunroof if it does not move smoothly.

ignition lock. Turn the SmartKey to position 2 in the ignition lock.
Raise the sliding sunroof fully at the rear.
another Keep the another switch pressed for another second.
fully opened and closed again. Make sure that the sliding sunroof can be fully opened and closed again.
above again. If this is not the case, repeat the steps above again.

opened or closed fully after resetting, If the sliding sunroof still cannot be opened or closed fully after resetting, contact a qualified specialist workshop.

    See also:

    Turn signal lamps/side marker lamps
    Switch off the lights. Open the hood. Remove the headlamp cover (). Left-hand headlamp: detach the washer fluid reservoir (). Turn bulb holder 1 or 2 counterclockwise and pull it out. W ...

    Operating the on-board computer
    The on-board computer is activated as soon as you turn the SmartKey to position 1 in the ignition lock. You can control the multifunction display and the settings in the on-board computer using ...

    Activating/deactivating
    - Turn the SmartKey to position 2 in the ignition lock. - To switch on: press the button. The indicator lamp in the button lights up. Airflow and air distribution are set to automatic mode ...