Changing the settings of the locking system
You can change the setting of the locking system in such a way that only the driver's door and the fuel filler flap are unlocked. This is useful if you frequently travel on your own.
To change the setting: press and hold down the and buttons simultaneously for approximately six seconds until the battery check lamp flashes twice.
If the setting of the locking system is changed within the signal range of the vehicle, pressing the or button locks or unlocks the vehicle.
The SmartKey now functions as follows:
To unlock the driver's door: press the
button once.
To unlock centrally: press the
button twice.
To lock centrally: press the
button.
The KEYLESS-GO function is changed as
follows:
To unlock the driver's door: pull the door
handle on the driver's door.
To unlock centrally: pull the door handle
on the front-passenger door or on the rear
doors.
To lock centrally: touch the outer sensor
surface on one of the door handles.
See also:
The windshield wipers are inoperative
The windshield wiper drive is malfunctioning.
Select another wiper speed on
the
combination switch.
Have the windshield wipers checked
at a
qualified specialist workshop. ...
Convenience
Activating/deactivating the EASYENTRY/
EXIT feature
You can use the Easy Entry/Exit: function
to activate or deactivate the EASY ENTRY/EXIT feature.
WARNING
You must make sure no one can becom ...
MOExtended tires (tires with run-flat
properties)
MOExtended tires (tires with run-flat
properties) allow you to continue driving your
vehicle even if one or more tires are entirely
deflated.
MOExtended tires may be used only in
conjunction ...