Special seat belt retractor
All seat belts except the driver's seat belt are equipped with a special seat belt retractor.
When activated, the special seat belt retractor ensures the seat belt will not slacken once the child restraint system has been secured.
Installing a child restraint system:
Always comply with the manufacturer's
installation instructions.
Pull the seat belt smoothly from the inertia
reel.
Engage the seat belt tongue in the belt
buckle.
Activating the special seat belt retractor:
Pull the seat belt out fully and let the inertia
reel retract it again.
While the seat belt is retracting, you should
hear a ratcheting sound. The special seat
belt retractor is enabled.
Push down on the child restraint system to
take up any slack.
Removing a child restraint system/deactivating the special seat belt
retractor:
Always comply with the manufacturer's
installation instructions.
Press the seat belt release button and
guide the belt tongue to the belt outlet.
The special seat belt retractor is
deactivated.
WARNING
Never release the seat belt buckle while the
vehicle is in motion, since the special seat belt
retractor will be deactivated.
See also:
Tires
Display messages
Possible causes/consequences and Solutions
USA only:
The yellow tire pressure monitor warning lamp (pressure loss/ malfunction)
is lit.
Risk of accid ...
Useful information
This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differe ...
Making adjustments in 1 mph (Canada: 1 km/h) increments
•► Briefly press the cruise control lever to the pressure point, up 1 for a higher speed or down 2 for a lower speed.
The last speed stored is increased or reduced. ...