SRS warning lamp

SRS functions are checked regularly when you switch on the ignition and when the engine is running. Therefore, malfunctions can be detected in good time.

The instrument SRS warning lamp in the instrument cluster lights up when the ignition is switched on. It goes out no later than a few seconds after the engine is started.

The SRS components are in operational readiness when the is not lit while the engine is running. SRS warning lamp is not lit while the engine is running.

WARNING
The SRS self-check has detected a malfunction if the
warning lamp: SRS warning lamp:
• does not come on at all
• fails to go out approximately 4 seconds after the engine was started
• comes on after the engine was started or while driving
For your safety, Mercedes-Benz strongly recommends that you have the system checked as soon as possible at an authorized Mercedes-Benz Center. Otherwise the SRS may not be activated when it is needed in an accident, which could result in serious or fatal injury. The SRS might also deploy unexpectedly and unnecessarily which could also result in injury.
In addition, improper work on the SRS creates a risk of rendering the SRS inoperative or causing unintended air bag deployment. Work on the SRS must therefore only be performed by qualified technicians. Contact an authorized Mercedes-Benz Center.
If it is necessary to modify an air bag system to accommodate a person with disabilities, contact an authorized Mercedes-Benz Center for details. USA only: Call our Customer Assistance Center at 1-800-FOR-MERCedes (1-800-367-6372) for details.

    See also:

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences ...

    Compass
    Calling up the compass ► Press the button on the multifunction steering wheel repeatedly until the Offroad menu appears in the multifunction display. The compass shows which direction t ...

    Selecting CD/audio DVD/MP3 discs
    Selecting via the media list In CD/audio DVD and MP3 mode: select Media by sliding or turning the COMAND controller and press to confirm. The media list appears. The dot indicates the ...