Installing/removing the towing eye
Installing the towing eye
•► Remove the towing eye from the vehicle tool kit
WARNING
The exhaust tail pipe may be hot. You could
burn yourself if you touch the tail pipe. Be
particularly careful when removing the rear
cover.
The mountings for the removable towing eyes are located in the bumpers. They are at the front and at the rear, under the covers.
Example: Sedan
•► Press the mark on cover 1 inwards in the direction of the arrow.
•► Take cover 1 off the opening.
•► Screw the towing eye in clockwise to the stop and tighten it.
Removing the towing eye
•► Loosen the towing eye and unscrew it.
•► Attach cover 1 to the bumper and press until it engages.
•► Place the towing eye in the vehicle tool kit.
See also:
Conditions for activation
RACE START can be activated when:
• the doors are closed.
• the engine is running and it has reached an
operating temperature of approximately
176 °F (80 °C). This is the case when the
engine ...
Important notes on tire pressure
WARNING
Should the tire pressure drop repeatedly:
• check the tire for foreign bodies.
• check whether the wheel is losing air or the valve is leaking.
• make sure that only a valve cap approved ...
Activating/deactivating Blind SpotAssist
Further information about Blind Spot Assist.
► Press
on the steering wheel
to select the Additional functions menu.
► Press the
button to select the
Blind Spot Assist function.
...