Securing the vehicle to prevent it from rolling awa
WARNING
Only jack up the vehicle on level ground or on
slight inclines/declines. The vehicle could
otherwise fall off the jack and injure you or
others.
If your vehicle is equipped with a wheel chock, it can be found in the vehicle tool kit.
The folding wheel chock is an additional securing measure to prevent the vehicle from rolling away, for example when changing a wheel.
•► Fold both plates upwards 1.
•► Fold out lower plate 2.
•► Guide the lugs on the lower plate fully into the openings in base plate 3.
Securing the vehicle on level ground (example:
Sedan)
•► On level ground: place chocks or other suitable items under the front and rear of the wheel that is diagonally opposite the wheel you wish to change.
Securing the vehicle on slight downhill gradients (example: Sedan)
•► On downhill gradients: place chocks or other suitable items in front of the wheels of the front and rear axle.
See also:
Socket in the rear-compartment center console
Socket in the rear-compartment center console
Pull cover 2 out by its top
edge.
Lift up the cover of socket 1. ...
Making adjustments in 5 mph (Canada: 10 km/h) increments
Briefly press the cruise control
lever
beyond the pressure point, up 1 for a
higher speed or down 2 for a lower speed.
The last speed stored is increased or
reduced. ...
Switching off the manual drive program
Vehicles with the dynamic
handling
package: press the program selector
button. M is no longer shown
in the multifunction display.
AMG vehicles: turn the drive
program
selector until C, ...