Cleaning the exhaust tail pipes
Impurities combined with the effects of road grit and corrosive environmental factors may cause flash rust to form on the surface. You can restore the original shine of the exhaust tail pipe by cleaning it regularly, especially in winter and after washing.
Do not clean the exhaust tail pipes with alkaline-based cleaning agents, such as wheel cleaner.
•► Clean the exhaust tail pipes with a chrome care product tested and approved by Mercedes-Benz.
See also:
High-beam flasher
To switch on: turn the SmartKey in the
ignition lock to position 1 or 2 or start the
engine.
Pull the combination switch in the direction
of arrow 3. ...
Using the rear center seat belt
If the left-hand rear seat backrest is folded
down and back up again, the rear center seat
belt may lock. The seat belt can then not be
pulled out.
To release the rear center seat belt:pull
o ...
Automatic locking feature
The vehicle locks automatically when the ignition is switched on and the wheels
of the vehicle are turning at a speed of more than 9 mph (15 km/h).
You could therefore be locked out when:
the v ...
