Installing/removing the combined cargo cover and net
You can reach the combined cargo cover and net to install and remove it from the cargo compartment and, with the seat backrest folded forwards, from the left-hand rear door.
•► Make sure that the cargo net and the cargo compartment cover are rolled up.
•► To remove: press button 2.
•► Fold the combined cargo cover and net forwards on the left-hand side with the seat backrest folded forwards, and fold it backwards with the seat backrest folded up.
•► First, detach the combined cargo cover and net from left-hand catch 1 and then remove it from right-hand fixture 3.
•► To install: push the combined cargo cover and net up to the stop into right-hand fixture 3.
•► Place the combined cargo cover and net into the left-hand fixture and push it into catch 1 until the combined cargo cover and net engages audibly.
•► Make sure that red lock status indicator 4 is no longer visible. The combined cargo cover and net will otherwise not be locked in place.
See also:
Engine
Display messages
Top Up Coolant See
Operator's Manual
Possible causes/consequences and ►
Solutions
The coolant level is too low.
► Add coolant, observing the warning notes
...
Adding engine oil
WARNING
If engine oil comes into contact with hot
engine parts, it may ignite and you could burn
yourself. Do not spill any engine oil on hot
engine parts.
Environmental note
When adding ...
Warning displays
The warning displays show the distance
between the sensors and the obstacle. The
warning display for the front area is located
on the dashboard above the center air vents.
The warning display f ...