Folding the seat backrest back
•► Move the driver's or front-passenger seat forward if necessary.
! Make sure that the seat belt does not become trapped when folding the rear seat backrest back. Otherwise, it could be damaged.
•► Fold rear seat backrest 1 back until it engages.
WARNING
Always lock the seat backrest in its upright
position when the rear seat bench is
occupied, or the extended cargo volume is not
in use.
Check for secure locking by pushing and pulling on the seat backrest.
In an accident, during hard braking or sudden maneuvers, loose items will be thrown around inside the vehicle. This can cause injury to vehicle occupants unless the items are securely fastened in the vehicle.
To help avoid personal injury during a collision or sudden maneuver, exercise care when transporting cargo.
You should always engage the rear seat backrests if you do not need the throughloading feature. This will prevent unauthorized access to the trunk from the vehicle interior.
•► Adjust the head restraints if necessary.
•► Move the driver's or front-passenger seat back if necessary.
See also:
Cargo tie-down rings
Observe the following notes on securing loads:
secure the load using the cargo tie down rings.
do not use elastic straps or nets to secure a load, as these are only intended
as an anti-slip p ...
Storing and maintaining the current
speed
You can store the current speed if you are
driving faster than 20 mph (30 km/h).
•► Accelerate the vehicle to the desired
speed.
•► Briefly press the cruise control lever
up 1 or d ...
Trip computer "From start" or "From
reset
The values in the From Start submenu are
calculated from the start of a journey, while
the values in the From Reset submenu are
calculated from the last time the submenu
was reset.
Press the ...