Activating/deactivating Blind Spot Assist

You can use the Blind Spot Asst. function to activate or deactivate Blind Spot Assist or Active Blind Spot Assist.

•► Press to select the DriveAssist menu. on the steering wheel to select the DriveAssist menu.

•► Press Asst.. to select Blind Spot Asst..

•► Press If the function is activated, the monitored.

If the function is activated, the monitored areas are shown in red in the multifunction display.

•► To activate/deactivate: press again again

    See also:

    Setting the exterior
    If the battery has been disconnected or completely discharged, the exterior mirrors must be reset. The exterior mirrors will otherwise not fold in when you select the "Fold in mirrors when lo ...

    Installing the towing eye
    Remove the towing eye from the vehicle tool kit. WARNING The exhaust tail pipe may be hot. You could burn yourself if you touch the tail pipe. Be particularly careful when removing the rear ...

    Activating cruise control
    You can adopt the current speed if you are driving faster than 20 mph (30 km/h). – Accelerate the vehicle to the desired speed. – Briefly press the cruise control lever up 1 or down 2. – Remo ...