Setting a speed

WARNING
Keep in mind that it may take a brief moment until the vehicle has made the necessary adjustments.

Increase or decrease the set vehicle speed to a value that the prevailing road conditions and legal speed limits permit. Otherwise, sudden and unexpected acceleration or deceleration of the vehicle could cause an accident and/ or serious injury to you and others.

•► Press the cruise control lever up 1 for a higher speed or down 2 for a lower speed.

•► Keep the cruise control lever pressed until the desired speed is reached.

•► Release the cruise control lever.

The new speed is stored.

Cruise control is not deactivated if you depress the accelerator pedal. For example, if you accelerate briefly to overtake, cruise control adjusts the vehicle's speed to the last speed stored after you have finished overtaking.

    See also:

    Instruction labels for tires and loads
    WARNING Do not overload the tires by exceeding the specified load limit as indicated on the Tire and Loading Information placard on the driver's door B-pillar. Overloading the tires can over ...

    Haven of calm: optimum vibration and acoustic comfort
    The new M-Class promises relaxed and therefore safe motoring under all possible (and even impossible) conditions. By paying close attention to detail every step of the way, the development enginee ...

    Speed rating
    The speed rating is part of the tire identification. It specifies the speed range for which the tire is approved. ...