Vehicles with automatic transmission
•► Shift the transmission to position P.
Using the SmartKey
•► Turn the SmartKey to position 0 in the
ignition lock and remove it.
The immobilizer is activated.
•► Apply the parking brake firmly.
If you turn off the engine with the SmartKey and then remove it from the ignition lock or open a front door, the automatic transmission shifts to P automatically.
Using KEYLESS-GO
•► Press the Start/Stop button.
The engine stops and all the indicator
lamps in the instrument cluster go out.
•► Apply the parking brake firmly.
If you use the Start/Stop button to switch off the engine, the automatic transmission shifts to N automatically. If you then open the driver's or front-passenger door, the automatic transmission shifts to P.
In an emergency, the engine can be turned off while the vehicle is in motion by pressing and holding the Start/Stop button for three seconds.
If you have started the engine with the Start/ Stop button and it cannot be switched off as described:
•► remove the Start/Stop button from the
ignition lock.
•► insert the SmartKey into the ignition lock.
The engine switches off. The ignition is in position 0.
See also:
Tire pressure of at least 180 kPa
(1.8 bar/26 psi) is not reached
If, after five minutes, a pressure of 180 kPa
(1.8 bar/26 psi) has not been achieved:
•► Press the on/off switch on the tire inflation
compressor to 0.
The tire inflation compressor is swi ...
Warranty
The Service and Warranty Information
booklet contains detailed information about
the warranties covering your vehicle.
Your authorized Mercedes-Benz Center will
exchange or repair any defective ...
Example: step 1 to 3
The following table shows examples on how to calculate total and cargo load
capacities with
varying seating configurations and number and size of occupants. The following
examples use
a load l ...
