Shifting to neutral N

•► When the vehicle is stationary, depress the brake pedal.

•► Push the DIRECT SELECT lever up or down to the first point of resistance.

If the engine has been switched off, the automatic transmission automatically switches to N.

Remaining in neutral N

If the automatic transmission is to remain in neutral N, e.g. for washing the vehicle in car washes with a towing device, please observe the following instructions:

WARNING
When leaving the SmartKey in the starter switch, do not leave children unattended in the vehicle. It is possible for children to switch on the ignition which could result in unsupervised use of vehicle equipment.

Unsupervised use of vehicle equipment could result in an accident and/or serious personal injury.

Using the SmartKey:

 - make sure that the ignition is switched on.
 - when the vehicle is stationary, depress the brake pedal and keep it depressed.
 - shift to neutral N.
 - release the brake pedal.
 - if applied, release the parking brake.
 - switch off the ignition and leave the SmartKey in the ignition lock.

Using KEYLESS-GO:

 - make sure that the ignition is switched on.
 - when the vehicle is stationary, depress the brake pedal and keep it depressed.
 - engage park position P.
 - release the brake pedal.
 - remove the Start/Stop button from the ignition lock.
 - insert the SmartKey into the ignition lock.
 - switch on the ignition.
 - depress the brake pedal and keep it depressed.
 - shift to neutral N.
 - release the brake pedal.
 - if applied, release the parking brake.
 - switch off the ignition and leave the SmartKey in the ignition lock.

    See also:

    Changing gear
    The automatic transmission shifts to the individual gears automatically when it is in transmission position D. This automatic gearshifting behavior is determined by: a shift range restriction, ...

    Using KEYLESS-GO to start the engine
    WARNING As long as the SmartKey is in your vehicle, the vehicle can be started. Therefore, never leave children unattended in the vehicle, as they could otherwise accidentally start the engin ...

    Storing a phone number which has not yet been stored
    Introduction For incoming calls from a person who is not in the address book, COMAND displays the phone number in the call list. You can save this entry. Storing as a new entry in the address ...